Service manual

2
2-14
McDATA Sphereon 4400 Fabric Switch Installation and Service Manual
Installation Tasks
Configure Product
Identification
Follow the procedures in this section to configure the product
identification.
NOTE: The Name, Location, and Contact variables correspond respectively to
the SNMP variables sysName, sysLocation, and sysContact, and are used by
management workstations when obtaining product data.
1. Select Identification from the Configure menu
(Configure>Switch>Identification). The Identification View appears
(Figure 2-4).
Figure 2-4 Identification View
a. Type a unique product name of 24 alphanumeric characters or
less in the Name field. If installed on a public LAN, the name
should reflect the product’s Ethernet network domain name
system (DNS) host name.
Options Product feature enablement (PFE) keys.
Security • SANtegrity authentication (settings, access control list, and remote authentication
dial-in user service (RADIUS) server support),
• Enterprise Fabric Mode
• SANtegrity binding (fabric, switch, and port binding
Interswitch Links • OpenTrunking
• Preferred path, and
• Interswitch link (ISL) port fencing