Service manual

Factory Defaults
2-1
2
Installation Tasks
This chapter describes tasks to install, configure, and verify operation
of the Sphereon 4400 Fabric Switch using the EFCM Basic Edition
interface or storage area network (SAN) management application.
The product can be installed on a table top, mounted in a Fabricenter
equipment cabinet, or mounted in any standard 19-inch equipment
rack.
Factory Defaults
Table 2-1 lists factory-set defaults for the product.
Table 2-1 Factory-Set Defaults (Product)
Item Default
EFCM Basic Edition interface user name (case sensitive) Administrator
EFCM Basic Edition interface password (case sensitive) password
Customer-level password (maintenance port access) password
Maintenance-level password (maintenance port access) level-2
IP address 10.1.1.10
Subnet mask 255.0.0.0
Gateway address 0.0.0.0