Service manual

1
1-16
McDATA Sphereon 4400 Fabric Switch Installation and Service Manual
General Information
• T10 Torx
®
tool - The tool is required to rack-mount products or to
remove, replace, adjust, or tighten chassis or cabinet components.
• ESD grounding cable and wrist strap - An ESD wrist strap is
required when working with ESD-sensitive FRUs, including
optical transceivers.
• Maintenance terminal - A desktop or notebook PC is required to
configure product network addresses and acquire event log
information through the maintenance port. The PC must have:
— The Microsoft® Windows® 98, Windows® 2000, Windows®
2003, Windows® XP, or Windows® ME operating system
installed.
— RS-232 serial communication software (such as ProComm
Plus™ or HyperTerminal) installed. HyperTerminal is
provided with Windows operating systems.
• Fiber-optic cleaning kit - The kit contains tools and instructions
to clean fiber-optic cables, connectors, loopback plugs, and
protective plugs.