Service manual

McDATA Sphereon 4400 Fabric Switch Installation and Service Manual
I-6
Index
full-volatility feature
configure PFE key
EFCM Basic 2-27
Element Manager 2-55
description 4-20, 4-45
G
gateway address
change switch address 2-19, 2-32
management server default 2-52
switch default 2-1, 3-1
H
hardware log 4-31
I
identification (configure)
EFCM Basic 2-14
Element Manager 2-59
illustrated parts breakdown
front-accessible FRUs 6-2
miscellaneous parts 6-4
power cords 6-5
rear-accessible FRUs 6-3
IML switch 4-4
installation tasks
summary 2-2
Task 1 - Verify installation requirements 2-4
Task 10 - Set management server date and
time 2-46
Task 11 - Configure the call-home feature
(optional) 2-48
Task 12 - Assign user names and passwords
2-49
Task 13 - Configure the product to the
management application 2-51
Task 14 - Record or verify server restore
information 2-52
Task 15 - Verify product-to-server
communication 2-53
Task 16 - Configure PFE key (optional) 2-55
Task 17 - Configure management server
(optional) 2-56
Task 18 - Set product date and time 2-57
Task 19 - Configure the Element Manager
application 2-59
Task 2 - Unpack, inspect, and install the
Ethernet hub (optional) 2-5
Task 20 - Back up configuration data 2-75
Task 21 - Cable Fibre Channel ports 2-77
Task 22 - Configure zoning (optional) 2-78
Task 23 - Connect product to a fabric element
(optional) 2-79
Task 24 - Register with the McDATA
filecenter 2-80
Task 3 - Unpack, inspect, and install the
product 2-9
Task 4 - Configure product at the EFCM
Basic Edition interface (optional)
2-12
Task 5 - Configure product network
information (optional) 2-32
Task 6 - Unpack, inspect, and install the
management server 2-35
Task 7 - Configure server password and
network addresses 2-38
Task 8 - Configure management server
information 2-40
Task 9 - Configure Windows operating
system users 2-44
internal loopback test
description 4-17, 4-41
EFCM Basic Edition 4-17
Element Manager 4-41
interop mode 2-18, 2-64
interswitch link
configure performance features
EFCM Basic 2-30
Element Manager 2-74
SAN management application 2-74
description 1-2
fault isolation 3-38
OpenTrunking 2-30, 2-74
port fencing 2-31, 2-74
preferred path 2-30, 2-74
IP address
change switch address 2-19, 2-32
DNS server default 2-52
management server default 2-52
switch default 2-1, 3-1