Service manual

B
B-2
McDATA Sphereon 4400 Fabric Switch Installation and Service Manual
Restore Management Server
• SAN Management data directory backup on CD-ROM - The
SAN management data directory is automatically backed up to a
CD when the server is rebooted or when the data directory
contents change. The data directory includes:
— Configuration data (product definitions, user names,
passwords, user rights, nicknames, session options, simple
network management protocol (SNMP) trap recipients,
E-mail recipients, and Ethernet event notifications).
— Log files (SAN management application logs and individual
Element Manager logs).
— Zoning library (all zone set and zone definitions).
—Firmware library.
— Call-home settings.
— Configuration data for each managed product (stored on the
server and in NV-RAM on each product).
• Windows configuration information - Windows operating
system network addresses, date and time information, user
information, and product identification are recorded during
installation of the server. Refer to Task 14: Record or Verify Server
Restore Information for information.
Restore Management Server Procedure
To restore the server:
1. At the server, press the left edge (PUSH label) of the LCD panel
to disengage the panel and expose the CD-RW drive.
2. Insert the Management Server Restore CD-ROM in the CD-RW
drive and close the LCD panel.
ATTENTION ! This procedure deletes all data from the C: hard
drive partition.
3. Press the power ( ) button. The server powers on and performs
the restore process from the CD-ROM.
4. After the restore process completes, the server makes an
audible series of beeps. Remove the Management Server Restore
CD-ROM from the CD-RW drive.