Service manual

4
4-52
McDATA Sphereon 4400 Fabric Switch Installation and Service Manual
Repair Information
1. Set the switch offline. For instructions, refer to Setting Online
State.
2. Select Backup & Restore Configuration from the Maintenance
menu(Maintenance>Backup&Restore Configuration). The Backup and
Restore Configuration dialog box appears (Figure 4-19).
3. Click Restore. A Warning dialog box appears, indicating the
existing configuration file is to be overwritten.
4. Click Ye s. A Restore dialog box appears, indicating the restore is in
progress.
When the operation finishes, the Restore dialog box appears a
Restore complete message.
5. Click Close to close the dialog box.
Reset Configuration
Data
When configuration data is reset to factory default values, the switch
defaults to the factory-set (Internet Protocol) IP address and all
optional features are disabled. To reset configuration data to factory
default settings:
Inform the customer the switch is to be set offline. Ensure the system
administrator quiesces Fibre Channel frame traffic through the
switch and sets attached FC-AL devices offline.
1. Set the switch offline. For instructions, refer to Setting Online
State.
2. At the SAN management application’s physical map, right-
click the product icon representing the switch for which a
configuration file is to be reset to factory default settings, then
select Element Manager from the pop-up menu. The application
opens.
3. Select Reset Configuration from the Maintenance menu
(Maintenance>Reset Configuration). The Reset Configuration dialog
box appears (Figure 4-20).