Service manual

4
Repair Procedures - SAN Management Application
4-49
Repair Information
3. Click Close to close the dialog box.
Add Firmware Version to Management Server Library
Ensure that the desired firmware version is obtained from the
Filecenter and resident on the management server hard drive. Refer
to Download Firmware or Software from the Filecenter for instructions.
NOTE: When upgrading firmware, follow all procedural information
contained in release notes or EC instructions that accompany the version.
Such information supplements information provided in this general
procedure.
To add a firmware version to the management server library:
1. Select Firmware Library from the Maintenance menu
(Maintenance>Firmware Library). The Firmware Library dialog box
appears (Figure 4-18).
2. Click New. The New Firmware Version dialog box appears.
3. Select the desired firmware version file (downloaded to the
management server hard drive). Ensure the correct filename
appears in the File name field and click Save. The New Firmware
Description dialog box appears.
4. Enter a description (up to 24 characters) for the new firmware
version. The description should include the installation date and
text that uniquely identifies the firmware version. Click OK. A
File Transfer message box appears. A progress bar travels across
the message box to show percent completion.
5. Upon completion, the File Transfer message box converts to a
Transfer Complete message box, indicating the new firmware
version is stored on the management server hard drive. Click
Close to close the message box.
6. The new firmware version and associated description appear in
the Firmware Library dialog box. Click Close to close the dialog
box.
7. To send the firmware version, refer to Download Firmware Version.
Download Firmware Version
To download a firmware version: