Service manual

4
Repair Procedures - SAN Management Application
4-37
Repair Information
Port Properties Dialog
Box
To open the Port Properties dialog box (Figure 4-12), double-click a
port graphic at the Hardware View or a port row at the Port List View.
The dialog box provides the following information::
Operational Number of
• Offline Sequences
• Link resets transmitted and received
Traffic • Port transmit and receive value for frames
• Four byte words received and transmitted
• Link utilization in percentage
• Number of traffic flows rerouted to or from an ISL due
to congestion
Table 4-7 Statistical Information in Performance View
Table 4-8 Port Properties Table
Port Property Description
Port Number The product’s port number.
Port Name The user-defined name or description for the port.
Type The port type (E_Port, F_Port, or G_Port).
Technology The type of port transceiver and optical cable installed.
Operating Speed The operating speed of the port (Not Established, 2 Gbps, or 10 Gbps).
Fibre Channel Address The logical port address (hexadecimal format). Not applicable for E_Ports.
Port WWN The Fibre Channel WWN of the port.
Attached Port WWN The Fibre Channel WWN of the device attached to the port.
Attached Port Nickname The alternate name for the node logged into the port.
Block Configuration A user-configured state for the port (Blocked or Unblocked).
Rx BB_Credits Configured The user-defined number of receive BB_Credits allocated to the port.
NPIV Login Limit Configured The user-defined maximum number of virtual addresses assigned to the physical port
when N_Port ID virtualization (NPIV) enabled.
Logged in IDs The number of virtual addresses logged in to the physical port.
LIN Alerts Configuration A user-specified state for the port (On or Off).
FAN Configuration A user-configured state for FAN configuration (Enabled or Disabled).