Service manual

4
Repair Procedures - SAN Management Application
4-31
Repair Information
Event Log The Event Log records events or errors. Entries reflect the status of the
management interface and managed product. The log describes:
• Date/Time - Date and time the event occurred.
• Event - Three-digit code that describes the event. Event codes are
listed and described in Appendix A, Event Code Tables.
• Description - Brief description of the event.
• Severity - Event severity (Informational, Minor, Major, or Severe).
• FRU-Position - Acronym representing the FRU type, followed by
a number representing the FRU chassis position.
• Event Data - Supplementary information (if available) in
hexadecimal format. Event data is described in Appendix A,
Event Code Tables.
Hardware Log The Hardware Log records a history of FRU removals and
replacements (insertions) for the switch. The log describes:
• Date/Time - Date and time the FRU was inserted or removed.
• FRU - Acronym representing the FRU type.
• Position - Number representing the FRU chassis position. The
chassis (slot) position for a nonredundant CTP card is 0. Chassis
slots for redundant power supplies are 0 and 1.
• Action - Action performed (Inserted or Removed).
• Part Number - Part number of the inserted or removed FRU.
• Serial Number - Serial number of the inserted or removed FRU.
Link Incident Log The Link Incident Log records Fibre Channel link incident events and
causes. The log describes:
• Date/Time - Date and time the link incident occurred.
• Port - Port number reporting the link incident.
• Link Incident Event - Brief description of the link incident and
cause, including:
— Implicit incident.
— Bit-error threshold exceeded.
— Loss of signal or loss of synchronization.
— Not-operational primitive sequence received.