Service manual

4
Repair Procedures - EFCM Basic Edition
4-15
Repair Information
Inspect Port Properties
At the Port List View, click a physical port number listed in the Port
column. Physical properties for the selected port appear in the lower
panel of the view:
Table 4-3 Inspect Port Properties Table
Port Property Description
Port Number The product’s port number.
Port Name The user-defined name or description for the port.
Port Type The user-defined port type (GX_Port, FX_Port, G_Port, F_Port, or E_Port).
Operating Speed The port operating speed (Not Established, 1 Gbps, 2 Gbps, or 4 Gbps)
Fibre Channel Address The Port FC address identifier. Port FC address if the port was swapped.
Port WWN The Fibre Channel world wide name (WWN) of the port.
Attached Port WWN Fibre Channel WWN of the device attached to the port.
Block Configuration The user-configured state for the port (Blocked or Unblocked).
Block Reason The reason for blocking the port.
Beaconing The user-specified for the port (On or Off).
FAN Configuration User-configured state for fabric address notification (FAN) configuration (Enabled or
Disabled).
RX BB Credit The number of receive BB credits available for the port.
Operational State The port state (Online, Offline, Not Installed, Inactive, Invalid Attachment, Link Reset,
No Light, Not Operational, Port Failure, Segmented E_Port, Disabled, or Te s t i n g ).
Reason A summary appears describing the reason if the port state is Segmented E_Port, In-
valid Attachment, or Inactive. For any other port state, the reason is N/A.