Service manual

4
Repair Procedures - EFCM Basic Edition
4-13
Repair Information
• Port # - Fibre Channel port number (decimal) transmitting frame
through the embedded port.
• Direction - Fibre Channel frame direction - incoming (I) or
outgoing (O).
• SOF - Start of frame character (hexadecimal).
• EOF - End of frame character (hexadecimal).
• Payload Size - Size of frame payload in bytes.
• Header - 24-byte frame header (hexadecimal).
• Payload - First 32 bytes of frame payload (hexadecimal).
Syslog Configuration The Syslog Configuration page enables you to configure client
systems to receive logs from the product.
A remote host receives copies of the system logs (syslogs), providing
a means to view logs if the product is unavailable.
The recipient clients are identified by IP address. You can specify
multiple clients for receiving logs. The interface also enables you to
choose which logs the product sends to its syslog recipients.
The following tasks can be performed using the Syslog
Configuration:
• Enable and disable syslogs.
• Add a syslog recipient to the list.
• Edit information for a syslog recipient.
• Delete syslog recipients from the list.
• Identify which logs are sent to recipients.
Performing Port
Diagnostics
Fibre Channel port diagnostic information is obtained by:
• Inspecting port properties, predictive optics monitoring (POM)
data, or port transceiver technology information at the lower
panel of the Port List View.
• Inspecting statistical information at the Performance View.
• Performing an internal or external loopback test.
Port List View The EFCM Basic Edition interface provides access to port diagnostic
information through the Port List View. To open this view, select Port