Service manual

4
Repair Procedures - EFCM Basic Edition
4-11
Repair Information
Link Incident Log The Link Incident Log records Fibre Channel link incident events and
causes. The log describes:
• Date/Time - Date and time the link incident occurred.
• Port - Port number reporting the link incident.
• Link Incident Event - Brief description of the link incident and
cause, including:
— Implicit incident.
— Bit-error threshold exceeded.
— Loss of signal or loss of synchronization.
— Not-operational primitive sequence received.
— Primitive sequence timeout.
— Invalid primitive sequence received for current link state.
Refer to MAP 0500: Port Failure or Link Incident Analysis for corrective
actions.
Audit Log The audit log appears a history of all configuration changes applied
to the switch from any source such as Element Manager, SNMP
management stations, or host. The audit log provides:
• Date/Time - The date and time of the log entry.
• Source - The source of Audit Log event.
• User ID - Identifier of the user that issued the command. The
identifier is usually an IP address.
• Action - The type of Audit Log event.
Security Log The security log provides:
• Reason - The reason code for the security event
• Date/Time - The date/time when the event occurred.
• Trig ger Le ve l - The trigger level of the event. Possible values
include: Informational, Security Change, or Error
• Count - A cumulative count of events within a known period.
• Category - The event category message with possible values may
be: Successful Connection, Disconnection, Configuration Change,
Authorization Failure, Authentication Failure, or Reserved.
• Description - Description of the event.