Service manual

4
4-10
McDATA Sphereon 4400 Fabric Switch Installation and Service Manual
Repair Information
Repair Procedures - EFCM Basic Edition
The following procedures (performed at a PC communicating with
the EFCM Basic Edition interface) are described:
• Obtaining Log Information on page 4-10
• Performing Port Diagnostics on page 4-13
• Collecting Maintenance Data on page 4-20
• Setting Online State on page 4-21
• Blocking or Unblocking a Port on page 4-22
• Upgrading Firmware on page 4-23
• Managing Configuration Data on page 4-25
Obtaining Log
Information
The EFCM Basic Edition interface provides access to logs that contain
maintenance information. Select the desired log from the Logs menu
at any view. Logs with maintenance information are:
•Event.
•Link Incident.
•Audit
•Security
• Open Trunking Re-Route.
•Fabric.
• Embedded Port Frame.
• Syslog Configuration.
Event Log The Event Log records events or errors. Entries reflect the status of the
management interface and managed product. The log describes:
• Date/Time - Date and time the event occurred.
• Error Code - Three-digit code that describes the event. Event
codes are listed and described in Appendix A, Event Code Tables.
• Severity - Event severity (Informational, Minor, Major, or Severe).
• Event Data - Supplementary information (if available) in
hexadecimal format. Event data is described in Appendix A,
Event Code Tables.