Service manual

4
4-8
McDATA Sphereon 4400 Fabric Switch Installation and Service Manual
Repair Information
8. Wait approximately five minutes for a response, then select (click)
My Requests at the top of the page. The Request History page
appears with the approved request (indicated by an approved
symbol ( ) in the Status column).
9. In the Action column adjacent to the approved request for the
firmware or software version, click Download. The File Download
dialog box appears.
10. Click Save. The Save As dialog box appears.
11. At the Save As dialog box, ensure the correct directory path is
specified at the Save in field, the correct file is specified in the File
name field, and click Save.
12. A Download dialog box appears, showing the estimated time
remaining to complete the firmware or software download
process. When the process finishes, the dialog box changes to a
Download complete dialog box.
13. Click Close to close the dialog box. The new firmware or software
version is downloaded and saved to the server hard drive.
14. Close the Internet session.
15. If required, transfer the downloaded file from the server to the
rack-mount management server or PC communicating with the
EFCM Basic Edition interface. Use a diskette, CD-ROM, or other
electronic means.
Port LED Diagnostics
Fibre Channel port diagnostic information is obtained by inspecting
port LEDs at the product front panel or emulated port LEDs at the
management interface (EFCM Basic Edition interface or SAN
management application). LEDs adjacent to each port and software
alert symbols indicate operational status as described in Table 4-1
.
Table 4-1 Port Operational States
Port
State
Green
LED
Amber
LED
Alert
Symbol
Description
Online On or
Blinking
Off None An attached device is ready to communicate, or is
communicating with other devices. Green LED illuminates.