Service manual

xvi
McDATA Sphereon 4400 Fabric Switch Installation and Service Manual
Preface
Chapter 4, Repair Information - This chapter describes
supplementary diagnostic and repair procedures for a failed
switch. The chapter includes procedures to display and use log
information, perform port diagnostics, manage configuration
data, collect maintenance data, power-on, power-off, and reset
the switch, set the switch online or offline, block ports, manage
switch firmware, clean fiber optics, and install or upgrade
management server software.
Chapter 5, Removal and Replacement Procedures - This chapter
describes procedures to remove and replace switch FRUs.
Chapter 6, Illustrated Parts Breakdown - This chapter illustrates,
describes, and shows the location of switch FRUs. In addition,
switch FRUs are cross-referenced to corresponding part numbers.
Appendix A, Event Code Tables - This appendix provides an
explanation of event codes that appear at the EFCM Basic Edition
interface or Element Manager application. The event severity and
a recommended course of action in response to each event are
also provided.
Appendix B, Restore Management Server - This appendix provides
the instructions to restore all required switch applications to the
management server in case of a hard drive failure.
An Index is also provided.
Related Publications Other publications that provide additional information about the
switch include:
• McDATA Products in a SAN Environment - Planning Manual
(620-000124).
• McDATA Sphereon 4400 Fabric Switch Element Manager User
Manual (620-000241).
• McDATA Product Safety Notices (620-000247).
• EFC Manager Software Release 8.7 User Manual (620-000170).
• McDATA EFCM Basic Edition User Manual (620-000240).
• McDATA SNMP Support Manual (620-000131).
• McDATA E/OS Command Line Interface User Manual (620-000134).