Service manual

3
MAP 0500: Port Failure or Link Incident Analysis
3-29
Maintenence Analysis Procedures
4
A connection is not allowed because of a conflict with the configured
port type. An expansion port (E_Port) is cabled to a Fibre Channel
device or a fabric port (F_Port) is cabled to a director or fabric switch.
a. For the product reporting the problem:
— EFCM Basic Edition - Select Ports and Basic Info from the
Configure menu at any view. The Basic Information View
displays.
— Element Manager - Select Ports from the Configure menu
at any view. The Configure Ports dialog box displays.
Table 3-11 Invalid Attachment Reasons and Actions
Byte 4 Invalid Attachment Reason Action
01 Unknown Contact the next level
of support.
02 ISL connection not allowed. Go to step 4.
03, 04 Incompatible switch. Go to step 5.
05 Loopback plug connected. Go to step 6.
06 N-Port connection not allowed. Go to step 4.
07 Non-McDATA switch at other end. Go to step 5.
08 E_Port capability disabled. Go to step 7.
0A Unauthorized port binding WWN. Go to step 2.
0B Unresponsive node. Go to step 8.
0C ESA security mismatch. Go to step 10.
0D Fabric binding mismatch. Go to step 11.
0E Authorization failure reject. Go to step 8.
0F Unauthorized switch binding WWN. Go to step 10.
10 Authentication failure Go to step 12.
11 Fabric mode mismatch. Go to step 5.