Service manual

2
2-80
McDATA Sphereon 4400 Fabric Switch Installation and Service Manual
Installation Tasks
b. At the Port List View, click the physical port number of the
fabric ISL (connected in step 5) in the Port column. Physical
properties for the port appear in the lower panel of the view.
c. Ensure that the Operational State field displays Online and the
Reason field displays N/A or is blank. If an ISL segmentation or
other problem is indicated, go to MAP 0000: Start MAP to
isolate the problem. If no problems are indicated, installation
tasks are complete.
7. Right-click the product icon at the SAN management
application’s physical map, then select Element Manager from the
pop-up menu.
8. Click the Hardware tab. The Hardware View (Figure 2-25) appears.
9. Double-click the graphical port connector used for the fabric ISL
(connected in step 5). The Port Properties dialog box appears.
10. Ensure that the Link Incident field displays None, the Operational
State field displays Online, and the Reason field displays N/A or is
blank. If an ISL segmentation or other problem is indicated, go to
MAP 0000: Start MAP to isolate the problem. If no problems are
indicated, installation tasks are complete.
Task 24: Register with the McDATA Filecenter
To complete the installation, register with the McDATA Filecenter
web site to receive e-mail updates and access the following:
• Technical publications.
• Firmware and software upgrades.
• Technical newsletters.
• Release notes.
To register with the Filecenter use the following steps:
1. Open the McDATA home page (http://mcdata.com). Select File
Center from the Support menu. The Filecenter home page opens
(Figure 2-36).
2. Select (click) the New User Registration option at the top of the
home page. The Filecenter’s New User Registration page appears.
Use the page to input user information. The following is required:
•Password.