Service manual

2
Task 21: Cable Fibre Channel Ports
2-77
Installation Tasks
NOTE: The default Windows user name is Administrator and the
default password is password. Both are case-sensitive.
g. Type the SAN management application default user ID and
password and select a server or IP address from the Network
Address drop-down list.
NOTE: The default user ID is Administrator and the default
password is password. Both are case-sensitive.
6. Click Login. The application opens and the EFCM main window
appears.
7. Remove the base restore CD from the CD-RW drive and store in a
safe location. Insert a blank rewritable CD into the CD-RW drive
and format the CD. Refer to step 1 for formatting instructions.
8. Go to Task 21: Cable Fibre Channel Ports.
Task 21: Cable Fibre Channel Ports
Follow the procedures in this section to cable Fibre Channel ports and
connect devices.
To cable Fibre Channel ports and connect devices, use the following
steps:
1. Route fiber-optic jumper cables from customer-specified Fibre
Channel devices, FC-AL devices, or fabric elements to product
ports.
2. Connect device cables to SFP optical port transceivers as directed
by the customer.
3. Perform one of the following:
• If the product is installed on a table or desktop, bundle and
secure Fibre Channel cables as directed by the customer.
• If the product is installed in a customer-supplied equipment
rack, bundle Fibre Channel cables from the product and other
equipment (groups of 16 maximum), and secure them as
directed by the customer.