Service manual

2
Task 19: Configure the Element Manager Application
2-71
Installation Tasks
Figure 2-34 Email Event Notification Setup Dialog Box
2. Select Enable Email Event Notification check box to enable e-mail
transmission to configured addresses.
3. Type the IP address or DNS host name of the SMTP server in the
E-mail Server field.
4. Type the e-mail address to which replies should be sent in the
Reply Address field.
5. Type the length of time the application should wait between
notifications at the Summary Interval field,. Choose seconds,
minutes, or hours from the associated drop-down list.
6. Click User List to specify users for notification,. The EFCM Server
Users dialog box appears.
7. Enable the check box in the Email column to enable notification
for a user. An unchecked box indicates e-mail notification is not
enabled.
8. Click OK to close the EFCM Server Users dialog box.
9. Select the Send to radio button (and type recipient IP addresses in
the adjacent field) , or select the Send to all users enabled for
notification radio button at the E-mail Test Options field.
10. Click Send Test Email. A test message is sent to configured
recipients.
11. Click OK to save the information and close the dialog box.
12. Maximize the Element Manager application.