Service manual

2
2-60
McDATA Sphereon 4400 Fabric Switch Installation and Service Manual
Installation Tasks
NOTE: The Name, Location, and Contact variables correspond respectively to
the SNMP variables sysName, sysLocation, and sysContact, and are used by
management workstations when obtaining product data.
1. Select Operating Parameters from the Configure menu
(Configure>Operating Parameters). The Operating Parameters dialog
box appears.
2. Click the Identification tab.(Figure 2-28).
Figure 2-28 Identification View
c. Type a unique product name of 24 alphanumeric characters or
less in the Name field. If installed on a public LAN, the name
should reflect the product’s Ethernet network domain name
system (DNS) host name.
d. Type a product description of 255 alphanumeric characters or
less in the Description field.
e. Type the product’s physical location (255 alphanumeric
characters or less) in the Location field.
f. Type the name of a contact person (255 alphanumeric
characters or less) in the Contact field.