Service manual

2
Task 19: Configure the Element Manager Application
2-59
Installation Tasks
•Click Activate to enable synchronization and close the
dialog box. Product date and time synchronize with the
SAN management application date and time at the next
update period (at least once daily).
•Click Sync Now to synchronize the product and SAN
management application immediately. The Date and Time
Synced information dialog box appears. Click OK to
synchronize the date and time and close the dialog box,
then click Activate to enable synchronization and close the
Configure Date and Time dialog box.
Task 19: Configure the Element Manager Application
To configure the Element Manager application, selectively perform
the following tasks according to customer requirements:
Configure Product
Identification
Follow the procedures in this section to configure the product
identification.
Product • Identification
• Product parameters
• Fabric parameters.
Ports • Basic information
• Buffer-to-buffer credits (BB_Credits)
• N_Port identifier virtualization (NPIV).
Management • SNMP trap message recipients
• Threshold alerts
• EFCM Basic Edition interface access
• Telnet access
• e-mail, Ethernet event, and call-home event notification.
Security • SANtegrity authentication
• Enterprise Fabric Mode
• SANtegrity binding.
Interswitch links • OpenTrunking
• Preferred path
• ISL port fencing