Operation Manual

English – 13
PRESENTATION
Cutting unit
The machines are equipped with a 2-blade Mulching cutting
deck. The machines can also be used with side ejection by
fitting the side ejector on the cutting cover. See instructions
under the heading Assembly.
Lifting pedal for cutting deck
The lifting pedal is used to put the cutting deck in either the
transport or mowing positions.
If the pedal is pressed down, the cutting deck is raised to the
tr
ansport position.
The transport position is activated as follows:
1 Press down the lifting pedal for the cutting deck.
2 Press in the lock button on the steering column.
3 Release the lifting pedal while keeping the button pressed
in.
If the lifting pedal is released without pressing in the lock
b
utton, the cutting deck will be lowered to the mowing
position.
The pedal can also be used to temporarily adjust the cutting
height, such as when passing a minor b
ump in the lawn.
Operation of blades.
Loosen the lever, move it forward and the blades start to
rotate.
Move the lever back and lock it to stop the blades from
rotating.
Cutting height adjustment lever
The cutting height can be adjusted to 5 different positions with
the cutting height lever.
Position 1 indicates the lowest cutting height and position 5
the highest.
Disengaging the blades.
Seat
The seat has a jointed attachment on the front edge and can
be tipped forward.
The seat can also be adjusted lengthways.
Loosen the bolts under the seat and adjust it forwards or
bac
kwards to the desired position.