Operation Manual

28 – English
TECHNICAL DATA
Note 1: The power rating of the engine indicated is the average net output (at specified rpm) of a typical production engine for the
engine model measured to SAE standard J1349/ISO1585. Mass production engines may differ from this value. Actual power
output for the engine installed on the final machine will depend on the operating speed, environmental conditions and other values.
Note 2: Noise emissions in the environment measured as sound power (L
WA
) in conformity with EC directive 2000/14/EC.
Note 3: Noise pressure level according to ISO 5395. Reported data for noise pressure level has a typical statistical dispersion
(standard deviation) of 1.2 dB(A).
Note 4: Vibration level according to ISO 5395. Reported data for vibration level has a typical statistical dispersion (standard
deviation) of 0.2 m/s
2
(steering wheel) and 0.8 m/s
2
(seat).
M125-85F M125-85FH
Dimensions
Length with cutting unit, mm/ft 2057 / 6,75 2057 / 6,75
Width with cutting unit, mm/ft 1029 / 3,38 1029 / 3,38
Height, cm/in 107 / 42 107 / 42
Machine with empty tanks, kg/lb 190 / 419 190 / 419
Wheel base, mm/ft 800/2.62 800/2.62
Tyre size, front 16*6-10 16*6-10
Tyre size, back 13*5-8 13*5-8
Air pressure, rear - front, kPa / bar / PSI 80/0,8/11,6 80/0,8/11,6
Engine
Brand / Model Briggs & Stratton / 3125 Briggs & Stratton / 3125
Nominal engine output, kW (see note 1) 6,5 6,5
Displacement, cm
3
/cu.in 344/21 344/21
Max.motor speed, r/min 2900 ± 100 2900 ± 100
Fuel, minimum octane grade lead-free 85 85
Fuel tank capacity, litre 3,3 3,3
Oil, class SJ-CF SAE 5W/30 or SAE 10W/30 SAE 5W/30 or SAE 10W/30
Oil tank capacity, litre/USqt 1,4/1,5 1,4/1,5
Starting Electric starter Electric starter
Electrical system
Type 12 V, negative earthed 12 V, negative earthed
Battery 12 V, 18 Ah 12 V, 18 Ah
Spark plug Champion QC12YC Champion QC12YC
Electrode gap, mm/inch 0,75/0,030 0,75/0,030
Main fuse Flat pin, 15 A. Flat pin, 15 A.
Noise emissions and cutting width (see note 2)
Sound power level, measured dB (A) 98 98
Sound power level, guaranteed dB(A) 99 99
Cutting width, cm/inch 85/33,5 85/33,5
Sound levels (see note 3)
Sound pressure level at the operators ear, dB(A) 83 84
Vibration levels (see note 4)
Vibration level on the steering wheel, m/s
2
4,3 4,3
Vibration level in the seat, m/s
2
1,3 1,3
Transmission
Brand Topec T7000 Tuff torq T36N
Lubricant SAE 80W-90 SAE 10W/30
Number of forward gears 3 -
Number of reverse gears 1 -
Forward speed, km/h. 0-8 0-7,5
Reverse speed, km/h 0-4 0-7,5
Cutting unit
Type Mulching Mulching
Cutting heights, 5 positions, mm/inch 25-70 / 1-2 3/4 25-70 / 1-2 3/4
Blade
Part number 5810835-01 5810835-01
Blade length, mm/inch 491 / 19,33 491 / 19,33