Operation Manual

English – 19
Driving
3 M125-85FH
Carefully press down one of the pedals until the required
speed is obtained. Pedal (1) is used to drive forwards, and
pedal (2) to drive backwards.
4 Select the required cutting height (1-5) using the cutting
height lever.
5 Lower the cutting unit.
6 Start the blades by first releasing the lever and then
moving it forward.
Stop the engine
Always park the machine on a level surface with the engine
OFF. Avoid idling the engine for long periods, as there is a risk
of carbon build-up on the spark plugs.
1 Disengaging the blades.
2 Lift up the cutting deck by stepping on the lifting pedal and
pressing in the lock button.
3 M125-85F Pull back the throttle and move the gear shift
lever to ”N" – neutral position. Turn the ignition key to the
”STOP”.
M125-85FH Pull back the throttle and turn the ignition key
to the ”STOP” position.
4 When the ride-on mower is at a standstill, engage the
parking brake.
IMPORTANT!
Never use position S when mowing. Position S is the
service position.
CAUTION!
The life span of the drive belts is increased significantly if
the engine runs at a low speed when the blades are
engaged. Therefore apply full throttle first when the cutting
unit has been moved to the mowing position.
2
1
N