Installation guide

18
Connect to your LAN
1 Review your configuration selections (Figure 11).
Figure 11 Confirm selections window
.
2 If you are satisfied with your settings, click Finish to activate the
new configuration.
NOTE: Depending on how you configured your LAN settings, you
may have to navigate to the UTM Firewall’s new LAN IP address to
access the Management Console.
3 Connect computers and your LAN hub to port A on the UTM
Firewall device.
uf_SG720_qig_700-2240A00_en-us.fm Page 18 Monday, October 12, 2009 11:56 AM