Installation guide

6
Install the UTM Firewall device in a PCI slot
To install the UTM Firewall device:
1 Turn off the power to the host computer.
2 Remove the cover of the computer.
3 Locate an unused PCI slot on the computer, and insert the UTM
Firewall device into it.
4 Replace the computer cover.
5 Turn on the computer. When Windows starts up, it automatically
detects the UTM Firewall device (recognized as a Realtek
RTL8139-series Fast Ethernet Adapter).
6 [Optional] Confirm that a new network adapter has been
installed:
a Select Start | Settings | Network and Dialup Connections
| Local Area Connection (possibly followed by a number) |
Properties.
b Make sure that the new adapter is listed in the Connect using
field.
uf_SG640_qig_700-2239A00_en-us.fm Page 6 Monday, October 12, 2009 12:06 PM