Installation guide

[Optional] Enter one or more DNS server(s) and a gateway

address to be used by the UTM Firewall device, not your

computer, for access to the Internet. Typically, this is not

necessary as only your computer needs to access the Internet.

f Click Update.

2 Enter IP address details for your computer.

a From the Start menu, select Control Panel, then double-click

Network Connections.

b Right-click the Local Area Connection icon (or appropriate

network connection for the newly installed PCI appliance), and

select Properties.

c Select Internet Protocol (TCP/IP), then click Properties.

d Enter the following details:

• IP address – The second free IP address that is part of the

subnet range of your LAN

• Subnet mask – The subnet mask of your LAN

• Default gateway – The IP address of your LAN default

gateway

• Preferred DNS server – The IP address of the DNS server

used by computers on your LAN

e Click OK.

3 Attach your UTM Firewall device Ethernet port to your LAN hub.

uf_SG640_qig_700-2239A00_en-us.fm Page 13 Monday, October 12, 2009 12:06 PM