System information

Comodo Endpoint Security Manager - SME - Administrator Guide
Computers can be added in four ways:
Import individual computers by specifying their IP addresses one-by-one - Enter the IP address of the computer
and click 'Add'. The IP address will be added and displayed below the text box. To add more computers, repeat the
process.
Import individual computers by specifying their names one-by-one - Enter the name of the target computer as
identified in the network and click 'Add'. The computer name will be added and displayed below the text box. To add
more computers, repeat the process.
Import a group of computers by specifying their IP Address range - Enter the IP Address range of the target
computers with the Start address and End address separated by a hyphen (e.g. 192.168.111.111-192.168.111.150)
and click 'Add'. The entered IP address range will be added and displayed below the text box. To add more IP address
ranges, repeat the process.
Import a group of computers by specifying IP Addresses and Subnet mask - Enter the IP Address and Subnet
mask (e.g. 192.168.111.111/24 or 192.168.111.111/255.255.255.0) in the text field and click 'Add'. The entered IP
address/subnet mask will be added and displayed below the text box. To add more IP address/subnet mask, repeat
the process.
To remove a computer/computer group added by mistake, select the computer/computer group from the text box
and click 'Remove'.
Swipe to the left or click the right arrow to move to the next step.
Note: IP addresses are specified relative to the ESM service computer.
Step 3 – Targets Summary
In this step, all the endpoints included in the previous Step 2 will be displayed.
Endpoint Security Manager - SME Administrator Guide | © 2013 Comodo Security Solutions Inc. | All rights reserved 59