Product guide

Table 7-2 Tenant mapping configuration options
Option Task steps
Bind listener to tenant
1
From the Tenant drop-down list, select the tenant.
2
Click OK.
Bind IP to tenant
1
In the IP field, enter the IP address.
2
From the Tenant drop-down list, select the tenant.
3
Click Add.
4
Click OK.
7
To bind the port, select and configure one of these options:
Table 7-3 Port binding configuration options
Option Task steps
Bind all server IP addresses. Select the Bind to all IP addresses checkbox.
Apply one server and IP address to
bind the port.
1
From the Bind node drop-down list, select the server.
2
From the to IP address drop-down list, select the IP
address.
8
In the Timeout field, use the arrows to select the allowed listener timeout in seconds, then click Save
and close.
Configure HTTP listeners
To enable Enterprise Authentication to accept HTTP authentication requests, configure HTTP listeners.
Task
1
On the administration interface, click the Listeners tab.
2
Create the HTTP listener.
a
Click Add listener.
b
From the Implementation drop-down list, select HTTPListenerImpl.
c
In the Name field, enter a unique name, then click Continue.
3
Configure the HTTP listener options.
a
In the URl field, enter the web resource name.
b
In the Port field, use the arrows to select the listener port.
c
Verify that the Enabled checkbox is selected.
d
From the SSL server certificate drop-down list, select the certificate key pair.
e
To enable the client certificate and SSL encryption protocol on the port, select the SSL client auth
checkbox.
f
To upload certificates, select and configure one of these options:
•
Upload trusted certificate
•
Add from store
4
Click Save and close.
7
Processing authentication requests with flows
Create custom authentication flows
40
McAfee Enterprise Authentication 1.0.0 Product Guide