Product guide

The Add New Device page is displayed.
e
Enter information in the appropriate fields and click Save.
Remember the Shared Secret value entered at this step. This value is used while you
configure the Sensor.
For more information on the fields in Add New Device page, see McAfee Network Security
Platform Installation Guide.
7 Configuring Sensor information
Configuring the Sensor involves specifying network information, a name, and the shared secret key
that the Sensor uses to establish secure communication with the Manager. Use the same name and
key values set earlier.
The first time you configure the Sensor, you must have physical access to the Sensor.
At any time during configuration, you can type a question mark (?) to get help on the Sensor
command-line interface (CLI) commands. For a list of all commands, type commands.
a
Log on to the Sensor using the terminal connected to the Console port.
b
At the prompt, log on using the default
Sensor user name (admin) and
password (admin123).
c
Optional, but recommended—Change
the Sensor password. At the prompt,
type: passwd.
5