Product guide

1 Position the Sensor
a
Keep the mounting ears and screws ready.
b
Attach the ears to the Sensor.
c
Install the Sensor into a rack.
2 Cabling the Management and Console ports
Ensure the Sensor is powered OFF before attaching cables.
a
Plug a Category 5e Ethernet cable in the Mgmt port.
b
Plug the other end of the cable into the
network device connected to your
Manager server.
c
Plug the DB9 Console cable supplied in
the Sensor box into the Console port
(labeled Console on the Sensor front
panel).
d
Connect the other end of the Console
port cable directly to a COM port of the
PC or terminal server you will be using
to configure the Sensor (for example, a
PC running correctly configured
Windows HyperTerminal software). You must connect directly to the console for initial
configuration; you cannot configure the Sensor remotely.
2