Product guide
5
Select Repeat Every to specify the days, hours, and minutes to turn on your systems at regular
intervals, then save the policy.
6
In the System Tree, assign the policy to the required systems or group.
• Systems — Click Actions | Agent | Set Policies & Inheritance, select ePO Deep Command 2.1 as the product,
select AMT Policies as the category, select the modified policy, select Break Inheritance, then save the
policy assignment.
• Group — Select ePO Deep Command 2.1 as the product, click Edit Assignment next to AMT Policies, select
the modified policy under Assigned policy, then save the policy assignment.
7
Enforce the policy using one of these methods:
• Wait for the next agent-server communication.
• Send an agent wake-up call.
• From the Intel
®
AMT systems, click McAfee Agent Status Monitor, then click Collect and Send Properties,
Check New Policies, and Enforce Policies.
• Click Actions | AMT Actions | Enforce AMT Policies, then click OK.
8
Verify the policy enforcement:
• View the policy enforcement status in Server Task Log.
• Navigate to the System Properties page, click the Deep Command tab, and make sure that the alarm is
updated in the Reported Local Alarm Clock Time.
• In the amtservice.log, the policy enforcement status is successful and the Alarm Clock Set Time
is shown in Universal Time Coordinated (UTC).
See also
Enforce Intel AMT policies on page 111
Create a Local Access policy
The Local Access feature allows the local Intel
®
AMT system to initiate a Fast Call For Help inside the
enterprise network.
Before you begin
The Local Area Network (LAN) Agent Handler to be used for the Local Access policy must
be active.
When a user initiates a connection, Intel
®
AMT detects that it is inside the enterprise and sends a local
access request directly to McAfee ePO.
Task
For option definitions, click ? in the interface.
1
In the McAfee ePO console, from Policy Catalog, select ePO Deep Command 2.1.0 as the product and AMT
Policies as the category, then click New Policy.
2
Type a name for the policy and any notes, then click OK.
3
Click the policy created, click the Remote Access tab, then select Allow ePO to enforce these settings.
4
From the Local Server, select Enable Client Initiated Local Access (CILA), then select an active LAN Agent
Handler from the drop-down list.
5
In Connection Type, select where the Intel
®
AMT system initiates the call to McAfee ePO. Available
options are BIOS Initiated and OS Initiated.
Managing your Intel AMT systems
Using policies to manage Intel AMT systems
8
McAfee ePO Deep Command 2.1.0 Product Guide
97