Product guide

Create the Intel AMT configuration policies
Use the AMT Configuration Policies category to create policies to configure or unconfigure your Intel
®
AMT
systems.
Tasks
Create a policy to configure Intel AMT systems on page 94
You can create a policy based on the Intel
®
AMT configuration policies.
Create a policy to unconfigure Intel AMT systems on page 94
You can create an unconfigure policy based on the Intel
®
AMT configuration policies.
Move systems from Client Control to Admin Control mode on page 95
Move Intel
®
AMT systems that were configured using host-based configuration to run in
Admin Control mode.
Create a policy to configure Intel AMT systems
You can create a policy based on the Intel
®
AMT configuration policies.
Before you begin
For Remote Configuration, make sure that the ePO Deep Command Profile Manager
software is installed and configured.
Task
For option definitions, click ? in the interface.
1
In the McAfee ePO console, from Policy Catalog, select ePO Deep Command 2.1.0 as the product and AMT
Configuration Policies as the category, then click New Policy.
2
Type a name for the policy and any notes, then click OK.
3
Select Allow ePO to enforce these settings, then select appropriate options.
Remote configure to enable Admin Control Mode — Select for remote configuration, then select the Intel
®
RCS server and the profile to be used for the configuration.
Host based configure to enable Client Control Mode — Select for host-based configuration, then select the
host-based profile. This configuration method doesn't need a configuration server.
4
Save the policy.
See also
Configuring Intel AMT systems on page 4
Create a policy to unconfigure Intel AMT systems
You can create an unconfigure policy based on the Intel
®
AMT configuration policies.
Before you begin
For the client in Admin Control mode, make sure that the ePO Deep Command Profile
Manager software is installed and configured.
Task
For option definitions, click ? in the interface.
1
In the McAfee ePO console, from Policy Catalog, select ePO Deep Command 2.1.0 as the product and AMT
Configuration Policies as the category, then click New Policy.
2
Type a name for the policy and any notes, then click OK.
8
Managing your Intel AMT systems
Using policies to manage Intel AMT systems
94
McAfee ePO Deep Command 2.1.0 Product Guide