Product guide

Property Description With
Intel
®
MEI
driver
installed
Without
Intel
®
MEI
driver
installed
Non-Intel
®
AMT
System
Reported Local
Alarm Clock
Time
Displays the alarm clock time set in the Intel
®
AMT
firmware during the ePO Deep Command Alarm
Clock policy enforcement or displays Not available
when no alarm is set.
X
Serial-over-LAN
(SOL)
Reports whether the SOL feature is supported and
enabled on this system. This property value is
reported as:
•
Not Available
•
Supported
•
Supported and Enabled
•
Supported and Enabled in BIOS only
X X
SOL Session
Active
Reports whether an SOL session is active on the
system.
System Model
Reports this system's model. For example, Dell
OptiPlex 755.
X X X
System
Manufacturer
Reports this system's manufacturer name. For
example, Dell Inc.
X X X
System Serial
Number
Reports the serial number of this system. For
example, 0ABC8BA.
X X X
TLS
Reports whether this system is in the Post
Configured state with TLS enabled. This property
value is reported as:
•
Not Available
•
Supported
•
Supported and Enabled
•
Supported and Enabled in BIOS only
This feature must be supported and enabled for
ePO Deep Command.
X
User Consent
Mode Required
Reports whether the user consent is required for
applying Intel
®
AMT actions on this system.
X
UUID
Reports the ID for this systems hardware. For
example,
4C4C4D44-004A-4A10-8048-C4C44F384253.
X X X
Web UI Enabled
Reports whether the Intel
®
AMT web interface is
enabled on this system (during the configuration).
This property value is reported as Yes or No.
X
Wired IPv4
Address
Reports the IPv4 address received over this
system's physical network connection. For
example, 172.12.000.123.
X
Wired Link
Status
Reports whether this system's physical network
connection is functioning. This property value is
reported as Up or Down.
X
Wired MAC
Address
Reports the MAC address received over this
system's physical network connection. For
example, 781bcb8cf20a.
X
7
Reporting on your Intel AMT systems
ePO Deep Command system properties
90
McAfee ePO Deep Command 2.1.0 Product Guide