Product guide

b
Complete these settings, then click OK.
Setup Name — Type a name for the Wi-Fi setup (up to 32 characters, and must not contain (/ \
< >: ; * |? ”) characters).
SSID — Type the Service Set Identifier (up to 32 characters) that identifies the specific Wi-Fi
network. (If left empty, the device tries to connect to all Wi-Fi networks that use Data
Encryption as defined in this Wi-Fi Setup.
Key Management Protocol — Select WiFi Protected Access (WPA) or Robust Security Network (RSN), as needed.
Encryption Algorithm — Select Temporal Key Integrity Protocol (TKIP) or Counter mode CBC MAC Protocol (CCMP),
as needed.
Authentication — Select Passphrase, type a password to establish the Wi-Fi connection, then
retype it to confirm.
c
Select these options:
Enable synchronization of Intel AMT with host platform WiFi profiles
Enable WiFi connection in all operating system power states (S0-S5)
6
On the System Settings page, select Synchronize Intel
®
AMT clock with operating system, as needed, then click
Next.
7
Click Finish to close Configuration Profile wizard.
8
Import this profile to McAfee ePO, create a configuration policy to use this profile, then enforce it to
the Intel AMT systems. See Configuring Intel AMT systems.
Validate wireless settings
Check the Intel
®
AMT system details in McAfee ePO to validate whether the correct wireless settings
have been applied.
Enabling Intel AMT wireless manageability
Validate wireless settings
6
McAfee ePO Deep Command 2.1.0 Product Guide
67