Product guide

An Intel
®
AMT wireless profile might not be updated when:
• A profile with similar "SSID" is present on the system.
• The system is configured again with the same profile or a delta configuration has been performed.
• Intel
®
Local Manageability Service driver is not installed or running.
• A wireless password has changed. For admin profiles, an administrator must run the maintenance
or delta configuration task. For user profiles, the user needs to locally reset the Intel
®
PROSet
interface or delete the profile manually from Intel
®
PROSet.
When you add a user profile on an Intel
®
AMT system that already has the maximum number of
profiles, the oldest profile is deleted to accommodate the new profile.
When you unconfigure a system, all wireless profiles are deleted. When you reconfigure a system,
only the admin profiles for the system are deleted.
For more information on wireless profile synchronization, see the Intel
®
PROSet/Wireless WiFi
Connection Utility User's Guide.
Create a delta configuration profile for wireless
Create delta configuration profiles for the configured systems to add wireless settings without
changing any other configuration.
Task
1
From the Intel
®
SCS Console, click the icon to create a profile, type a unique name, type any
description, then click OK to open the Configuration Profile wizard.
2
On the Getting Started page, select Delta Configuration, then click Next.
3
On the Profile Scope page, select Clear All and select only WiFi Connection, then click Next.
Enabling Intel AMT wireless manageability
Create a delta configuration profile for wireless
6
McAfee ePO Deep Command 2.1.0 Product Guide
65