Product guide

Configuration states
ePO Deep Command adds a system property to determine the configuration status of Intel
®
AMT
systems.
• Pre-configuration — By default, the Intel
®
AMT features on Intel
®
vPro
™
systems are disabled
because the systems are unconfigured. ePO Deep Command cannot manage such systems
remotely. All unconfigured clients are categorized under this state.
• In-configuration — While a host-based or remote configuration is in-progress, the Intel
®
AMT
systems are moved from pre-configuration to in-configuration.
When configuration fails, check whether the system state is still in the in-configuration state. A
system in this state might be at risk. We recommend that you resolve the configuration issue, then
configure it again.
• Post-configuration — When the configuration process is complete, ePO Deep Command can
manage the Intel
®
AMT systems. Such systems are considered in post-configuration.
3
Basics of Intel AMT configuration
Configuration states
42
McAfee ePO Deep Command 2.1.0 Product Guide