Product guide

Enable the certificate template
Enable the certificate template that you created for Intel
®
AMT configuration.
Task
1
In the Certificate Authority server, click Start | Programs | Administrative Tools | Certification Authority.
2
From the Console Root tree, select Certificate Authority | Certificate Templates. Right-click the right pane and
select New | Certificate Template to Issue.
3
In the Enable Certificate Templates screen, select a template to use, then click OK.
The template now appears in the right pane with the other certificate templates.
Issue certificates automatically
Configure to issue certificates automatically to avoid sending the certificate requests to "pending"
queue.
ePO Deep Command doesn't support pending certificate requests. If during configuration, the CA puts
the certificate into the “Pending Requests” state, Intel
®
SCS returns an error (#35).
Task
1
In the Certificate Authority server, click Start | Programs | Administrative Tools | Certification Authority.
2
Right-click the CA and select Properties.
3
Click the Policy Module tab, then click Properties.
4
In the Request Handling tab, select Follow the settings in the certificate template, if applicable. Otherwise, automatically
issue the certificate, then click OK.
Create a configuration profile that uses Microsoft CA
certificates
When you're creating a profile, select the Microsoft CA option as a method for creating certificates.
If you're using McAfee ePO Deep Command root CA certificates, see Create a configuration profile.
A
Additional information
Set up the environment for Microsoft CA authentication
154
McAfee ePO Deep Command 2.1.0 Product Guide