Product guide

•
IDE redirection
•
KVM redirection
b
In Power Management Settings, select Always on (S0-S5).
c
In Network Settings, type the password for locally accessing the MEBX settings (default is admin on
a new system).
If you want to use mixed mode and created a password in Edit Server Settings to support host-based
configuration, type the same password in this field.
d
Select Enable Intel
®
AMT to respond to ping requests and Enable Fast Call for Help (within the enterprise network).
9
Click Finish to close Configuration Profile wizard.
The profile is added to the list of profiles.
Customize wireless retry settings
Retries are implemented to establish a connection to perform Intel
®
AMT actions on a wireless client.
By default number of retries are three times and retry delay is 5 seconds. You can override these
values by performing this task.
Task
For option definitions, click ? in the interface.
1
Close the McAfee ePO console, stop Application and Server services, then browse to this directory:
<Installation Directory>\McAfee\ePolicy Orchestrator\DB
(Replace <Installation Directory> with the McAfee ePO installation directory)
2
Open notepad and type the following content:
[Connection]
RetryCount=<0 to 10>
RetryDelay=<1000 to 15000 miliseconds>
MeSwitchDelay=<20000 to 180000 miliseconds>
(Replace the values as needed)
3
Save the file as .ini (for example, edc.ini).
4
Start the McAfee ePO Application and Server services, then perform an Intel
®
AMT action on a client
from the McAfee ePO console.
To validate the changes, check AMTService.log for an entry similar to the following:
Read <file_name>.ini for retry overrides
Retry Count is <Number of Retries>
Retry Delay is <Interval in milliseconds>
ME Switch Delay is <Interval in milliseconds>
Additional information
Customize wireless retry settings
A
McAfee ePO Deep Command 2.1.0 Product Guide
149