Product guide

7
On the Network Configuration page, perform these steps to set up wireless connections, then click Next.
a
Select Allow WiFi connection with the following WiFi setups, then click Add to open the WiFi Setup screen.
b
In the Setup Name field, enter a name for the Wi-Fi setup. The setup name can be up to 32
characters, and must not contain (/ \ < >: ; * |? ”) characters.
c
In the SSID field, enter the Service Set Identifier (up to 32 characters) that identifies the specific
Wi-Fi network. If left empty, the device tries to connect to all Wi-Fi networks that use Data
Encryption as defined in this Wi-Fi Setup.
d
From the Key Management Protocol drop-down list, select one of these options:
•
WiFi Protected Access (WPA)
•
Robust Security Network (RSN)
e
From the Encryption Algorithm drop-down list, select one of these options:
•
Temporal Key Integrity Protocol (TKIP)
•
Counter mode CBC MAC Protocol (CCMP)
f
Under Authentication, select Passphrase, type a password to establish the Wi-Fi connection, then
retype it to confirm.
These settings are required to establish connection to wireless Intel
®
AMT systems. However, the
client must have a wired connection during the configuration process.
8
On the System Settings page, complete the options, as needed, then click Next.
a
In Management Interfaces, select all these options:
•
Web UI
•
Serial Over LAN
A
Additional information
Create a configuration profile using Intel RCS
148
McAfee ePO Deep Command 2.1.0 Product Guide