Product guide
Task
For option definitions, click ? in the interface.
1
From the McAfee KVM Viewer screen, click Connection | Stop.
The current active session is stopped.
2
Click Tools | Options, from the General tab, specify the needed Intel
®
AMT system in the Computer field,
then click Connect.
The connection is switched to the selected Intel
®
AMT system.
You can connect to multiple Intel
®
AMT systems from the same KVM host system by starting multiple
instances of McAfee KVM Viewer and connecting to a different system in each instance.
McAfee KVM Viewer options
Once you connect to a client system, use the menu bar options in the KVM console to perform
required actions.
Option Suboption Description
File Exit
Closes the McAfee KVM Viewer page.
An active IDE-Redirection session does not end when the McAfee KVM
Viewer is closed.
Connection Start
Starts a connection to the client system.
Stop
Ends a connection to the client system.
Refresh
Reloads the screen in display.
Color Quality
Allows selecting the quality of the video component: Maximum, Medium, or
Low.
Scale Video
Allows resizing the screen to a specific percentage.
Full Screen
Displays the screen in Full Screen mode.
Tools Send Ctrl-Alt-Del
Sends Ctrl-Alt-Del command to the client system.
Power Control
Sends the Intel
®
AMT power control commands to the client system:
• Power Up — Select to power up your Intel
®
AMT system.
• Power Down— Select to shut down your Intel
®
AMT system.
• Power Reset — Select to restart your Intel
®
AMT system.
• Boot with IDER — Select to boot the Intel
®
AMT system from using
IDE-Redirection device. This device must be configured on the Media
Redirection tab.
• End IDER Session — Select to end the IDE-Redirection session (available
only when an IDE-Redirection session is active).
Connecting to Intel AMT systems using KVM
McAfee KVM Viewer options
9
McAfee ePO Deep Command 2.1.0 Product Guide
127