Product guide

Use Microsoft Management Console
Add the McAfee ePO Deep Command Root CA certificates, when used, to the certificate store of the
system where you're accessing the McAfee KVM Viewer for the connection.
Before you begin
Export the McAfee ePO Deep Command Root CA from Server Settings | Intel AMT credentials | Edit
page. See Export an active certificate for instructions.
Task
1
In the KVM host system, run mmc from the command prompt.
2
From File, click Add/Remove Snap‑in, select Certificates, then click Add.
3
From the Certificates snap‑in window, select My user account, click Finish, then click OK.
4
In Console Root, expand Certificates - Current User | Trusted Root Certification Authorities, right‑click Certificates,
then click All Tasks | Import.
5
In the Certificate Import wizard, click Next, then browse to and select the McAfee ePO Deep
Command Root CA certificate (for example, CN_McAfee_ePO_Deep_Command_Root_2013‑04‑17_01
_53_04.crt), click Next, click Next again, then click Finish. If you receive a security warning, click Yes,
then click OK to confirm.
See also
Export an active certificate on page 30
Modify the McAfee KVM Viewer settings
Provide settings required for a successful connection.
Before you begin
Make sure that the required certificates are available in the certificate store of the KVM
system. For information on adding the ePO Deep Command Root CA certificate, see Add a
McAfee ePO Deep Command Root CA certificate.
Connecting to Intel AMT systems using KVM
Modify the McAfee KVM Viewer settings
9
McAfee ePO Deep Command 2.1.0 Product Guide
123