Product guide

McAfee KVM Viewer module

Administrators can use the McAfee KVM Viewer module to remotely access Intel

AMT systems that are

KVM-enabled and -supported. From the McAfee KVM Viewer console, you can perform actions on the

connected Intel

AMT system such as turn it on, turn if off, restart it, and boot it with an

IDE-redirection device.

The McAfee KVM Viewer has an external console; however, the Intel

AMT policy can be configured in

McAfee ePO with these KVM settings:

• Enable or disable KVM support — If KVM is supported on an Intel

AMT system, enable this

feature on the client.

• User consent — Specify whether to take user consent for KVM connections. If user's consent is

enabled, it generates a passcode on the Intel

AMT system screen when an administrator tries to

connect. The same passcode must be entered in the KVM console for a successful connection. You

can also specify the time after which the passcode expires.

• Default monitor — If you are using multiple monitors, select which monitor of the client system

to display: Primary, Secondary, or Tertiary. This table lists the maximum screen resolution supported for

an Intel

AMT system.

Client Screen resolution (with 16-bits of color depth)

Intel

AMT 6.0 1600x1200

Intel

AMT 6.0 maintenance release 2 1920x1080

Intel

AMT 7.x 1920x1200

Intel

Management Engine 8.0 1920x1200

• Session timeout — Specify the time after which the KVM connection must time out.

Introduction

Product components

McAfee ePO Deep Command 2.1.0 Product Guide