Product guide

See also
Connect to a system using the Serial-over-LAN on page 109
McAfee KVM Viewer options on page 127
Stop image redirection
You can stop an in-progress image redirection for the selected client systems, as needed.
Task
For option definitions, click ? in the interface.
1
In the McAfee ePO console, from System Tree, select the systems or groups for which IDE-Redirection
is active.
2
Click Actions | AMT Actions | Stop Image Redirection, then click OK.
3
View the policy enforcement status in Server Task Log.
4
Boot or restart the systems normally using the Normal Boot/Reboot option, or use SOL to restart the
system.
Enforce Intel AMT configuration policy
You can use this action to immediately configure the Intel
®
AMT capable systems that have a
configuration policy assigned to them.
Task
For option definitions, click ? in the interface.
1
In the McAfee ePO console, from System Tree, select the required systems or groups that you want to
configure.
2
Click Actions | AMT Actions | Enforce AMT Firmware Configuration Policy, then click OK.
3
View the policy enforcement status in Server Task Log.
4
Boot or restart the systems normally using the Normal Boot/Reboot option, or use SOL to restart the
system.
Enforce Intel AMT policies
You can use this action to immediately enforce the Intel
®
AMT policies of Alarm Clock, Local Access,
Remote Access, and KVM, on the selected systems.
Task
For option definitions, click ? in the interface.
1
In the McAfee ePO console, from System Tree, select the required systems or groups where you want
to enforce the policies.
2
Click Actions | AMT Actions | Enforce AMT Policies, then click OK.
3
View the policy enforcement status in Server Task Log.
Managing your Intel AMT systems
Use the Intel AMT actions
8
McAfee ePO Deep Command 2.1.0 Product Guide
111