Manualshelf

Product guide

ManualsBrandsMcafee ManualsOtherFIREWALL 2.1-GETTING STARTED
101102103104105106107108109110
4
(Optional) In Additional Action, select Launch Serial-over-LAN Terminal (SOL) to access the target system from
the server side.
You can use the arrow keys to navigate through the BIOS menu that is displayed on the SOL
terminal.
5
In User Consent Mode,
a
Select Operate in User Consent Mode (UCM).
Make sure that you enable the User Consent Mode for only one system at a time. User consent is
required for the clients in Client Control mode and optional for the clients in Admin Control
mode.
b
Type the timeout for UCM code. This time specifies the number of seconds to wait before the
UCM code is displayed. When the Intel
®
AMT system is in hibernate mode or is powered off, then
the ePO Deep Command client first turns on the system.
c
Select the monitor of the Intel
®
client system to display: Primary, Secondary, or Tertiary.
d
Click Start UCM to generate a UCM code on the Intel
®
AMT system, then type the code displayed
on the client system.
6
Click Initiate Action to establish the connection and initiate the required action.
7
View the policy enforcement status in Server Task Log.
When the Boot/Reboot with Options status is In Progress, a connection is established and you can start
diagnosing the system issues.
See also
Connect to a system using the Serial-over-LAN on page 109
McAfee KVM Viewer options on page 127
Boot or restart a system normally
You can boot or restart the managed Intel
®
AMT systems from McAfee ePO when required. For
example, when you want to leave the recovery operating system image.
You can also perform this task from the McAfee KVM Viewer console.
Task
For option definitions, click ? in the interface.
1
In the McAfee ePO console, from System Tree, select the systems that you want to boot or restart.
2
Click Actions | AMT Actions | Boot/Reboot with Options.
3
Select Normal Boot/Reboot to boot or restart the Intel
®
AMT system. You can also select Launch
Serial-over-LAN Terminal (SOL) to access the Intel
®
AMT system from the server side.
4
View the policy enforcement status in Server Task Log.
See also
McAfee KVM Viewer options on page 127
8
Managing your Intel AMT systems
Use the Intel AMT actions
108
McAfee ePO Deep Command 2.1.0 Product Guide