Installation guide

104
Chapter 11 Installing the Engine on Other Platforms
Configuring the Operating System Settings
 To set the keyboard layout
1. Highlight the entry field for Keyboard Layout and press Enter. The Select Keyboard Layout
dialog opens.
2. Highlight the correct layout and press Enter. Type the first letter to move forward more
quickly.
Tip – If the desired keyboard layout is not available, use the best-matching available layout, or select
US_English.
 To set the engine’s timezone
1. Highlight the entry field for Local Timezone and press Enter.
2. Select the correct timezone.
The timezone setting only affects the way the time is displayed on the engine command line. The
engine always uses UTC time. The engine’s clock is automatically synchronized with the
Management Server’s clock.
 To set the rest of the operating system settings
1. Type in the name of the engine.
2. Enter and confirm the password for the user
root. This is the only account for engine
command line access.
3. (Optional) Highlight Enable SSH Daemon and press the spacebar to allow remote access to
engine command line using SSH.
4. Highlight Next and press Enter. The Configure Network Interfaces page opens.
Note – Unless you have a specific need to enable SSH access to the engine command line,
we recommend leaving it disabled.
What’s Next?
 Continue by Configuring the Network Interfaces (page 105).