Installation guide

___________________________________________________4
2.1 Installing MPEG 2 Codecs
The Exterity avediaCentre software requires the installation of a set of MPEG
2 codecs which decode the incoming video streams for Exterity avediaCentre
to display. These are not installed automatically and must be installed by the
user prior to installing Exterity avediaCentre.
To install the MPEG 2 codecs insert the CD which automatically starts
Setup.exe shown above. If the CD fails to start, find the Setup.exe installation
program on the CD, use Start -> My Computer. Find the CD drive which will
be marked as avediaCentre (D:) or similar. Right-click on the CD and choose
Open. The setup.exe program should now be listed.
Select the “Install MPEG 2 Codecs” button. The MPEG 2 Codec installation
begins. Follow the on screen instructions to complete the installation.