User`s guide

Universal Library User's Guide Universal Library for .NET Description & Use
24
Enumeration Name
Description
MccDaq.ErrorReporting
Defines all error reporting options.
MccDaq.EventType
Lists all available event conditions.
MccDaq.FieldDelimiter
Lists all options for specifying the delimiter character used to separate fields
in a converted binary log file.
MccDaq.FlagPins
Lists all signals types that can be routed to the FLG1 and FLG2 pins on the
7266 counters.
MccDaq.FunctionType
List all valid function types used with data acquisition methods.
MccDaq.GateControl
List all of the gating modes for configuring a 9513 counter.
MccDaq.IndexMode
List the actions to be taken when the index signal is received by a 7266
counter.
MccDaq.LoggerUnits
Lists the options used to specify the units for analog data in a binary file
MccDaq.OptionState
Enables or disables various options.
MccDaq.PrimaryBitConfigPortType
Defines digital port types for bit level configuration.
MccDaq.PrimaryDigitalPortType
Defines digital port types for bit level input/output methods.
MccDaq.Quadrature
Lists all of the resolution multipliers for quadrature input.
MccDaq.Range
Defines the set of ranges within the UL for A/D and D/A operations.
MccDaq.RecycleMode
Lists the recycle mode options for 9513 and 8536 counters.
MccDaq.Reload
Lists the options for reloading the 9513 counter.
MccDaq.ScanOptions
List the available scan options for paced input/output methods.
MccDaq.SignalType
List all signal types associated with a connector pin on boards supporting a
DAQ-Sync connector.
MccDaq.SignalDirection
Lists all of the directions available from a specified signal type assigned to a
connector pin.
MccDaq.SignalPolarity
List all available polarities for a specified signal.
MccDaq.SignalSource
List all of the signal sources of the signal from which the frequency will be
calculated.
MccDaq.SoftwareTriggerType
Defines trigger types for software triggering.
MccDaq.StatusBits
List all status bits available when reading counter status.
MccDaq.TempScale
Lists the options used to specify the units for analog data in a converted file.
MccDaq.TimeFormat
Lists all options for specifying the time format of timestamp data.
MccDaq.TimeOfDay
List all time of day options for initializing a 9513 counter.
MccDaq.TimeZone
Lists all options for specifying the time zone of timestamp data
MccDaq.TriggerType
List all valid trigger types for the MccBoard.SetTrigger method.
MccDaq.ThermocoupleOptions
Specifies whether or not to apply smoothing to temperature readings.