User`s guide

Universal Library User's Guide Analog Input Boards - USB-1616HS-BNC
116
Options: BACKGROUND, CONTINUOUS, EXTTRIGGER
You can use cbSetTrigger()/SetTrigger() to program the trigger for rising
edge, falling edge, or the level of the digital trigger input (TTL).
LoadValue: 0 to 65535
Refer to "16-bit values using a signed integer data type" on page 16 for information
on 16-bit values using unsigned integers.
Timer Output
Timer functions and methods supported
UL: cbTimerOutStart(), cbTimerOutStop()
UL for .NET: TimerOutStart(), TimerOutStop()
Timer argument values
TimerNum: 0 to 1
Frequency: 15.260 Hz to 1.0 MHz
Triggering
Trigger functions and methods supported
UL: cbSetTrigger()
UL for .NET: SetTrigger()
Trigger argument values
TrigType TRIGABOVE, TRIGBELOW, TRIGHIGH, TRIGLOW, TRIGPOSEDGE, TRIGNEGEDGE
Digital triggering (TRIGHIGH, TRIGLOW, TRIGPOSEDGE, TRIGNEGEDGE) is not
supported for pre-trigger acquisitions (cbAPretrig()/ATrig()). Analog triggering
(TRIGABOVE, TRIGBELOW) is not supported for cbDInScan()/DInScan()and
cbCInScan()/CInScan().
Threshold Analog hardware triggering, 12-bit resolution:
0 to 4095 (supported for cbAInScan()/AInScan() only)
Analog software triggering, 16-bit resolution:
0 to 65535 (supported for cbAPretrig()/ATrig() only)
DAQ input
DAQ input functions and methods supported
UL: cbDaqInScan()
UL for .NET: DaqInScan()
DAQ input argument values
Options BACKGROUND, CONTINUOUS, EXTCLOCK, CONVERTDATA, DMAIO, BLOCKIO, EXTTRIGGER
ChanTypeArray ANALOG, DIGITAL8, DIGITAL16, CTR16, CTR32LOW, CTR32HIGH, SETPOINTSTATUS
ChanArray ANALOG: 0 to 15 (only differential mode available)
DIGITAL8: FIRSTPORTA, FIRSTPORTB
DIGITAL16: FIRSTPORTA
CTR16: 0-3 counters
CTR32LOW: 0-3 counters