User`s guide

33
Filtering|Message Data - Displays the Message Data Filter dialog
box. (New for V2.3)
Use the Message Data Filter dialog box to select I
2
C messages to
display by data content and by protocol error detection.
Click on a grid cell to enter match data in hexadecimal digits
(00...FF), ASCII codes (i.e. 'a for the letter a), or XX for don't care.
Enter up to 8 match data per message byte. Click “Match” to display
message on Match (Y) or Non-Match (N) condition.
Check the Protocol Error checkbox to display only messages with
detected Smart Battery System (SBS) protocol errors for the
currently selected SBS specification revision.
Message Data display filtering is enabled with the Filtering check
box on the main screen.